Abstract
Perovskite-sensitized upconversion (UC) has re-sulted in near-infrared-to-visible UC at solar-relevant fluxes. However, the successful implementation of UC devices into operating solar cells will result in exposure to similar environmental stressors as for the commercial photovoltaics (PVs), mainly elevated temperatures, and continuous irradiation. In this article, we investigated the effects of these two stressors, heat and light, on the triplet generation process at the perovskite/rubrene interface. Following exposure to both stressors, local discrepancies across the upconversion device were discovered. The first region showed changes to the morphology, and no detectable upconverted emission was observed. Through the combination of optical microscopy and spectroscopy, crystallization of the organic semiconductor layer, degradation of dibenzotetraphenylperiflanthene, and concurrent degradation of the perovskite sensitizer were found. These effects culminate in a reduction in both triplet generation and triplet-triplet annihilation. In the second region, no changes to the morphology were present and visible UC emission was observed following exposure to both stressors. To probe the triplet sensitization process at elevated temperatures, transient absorption spectroscopy was performed. The presence of the excited spin-triplet state of rubrene at 60 degrees C highlighted successful triplet generation even at elevated temperatures. This work emphasizes the challenges and continued potential for the integration of perovskite-sensitized UC into commercial photovoltaic devices.